 | 1. Platform structure, with the overall platform structure to design, using the high-strength tensile pattern table panel. Bottom of the panel frame with a unique "I" to support structure, effectively break force distribution, reducing the frame torque. Table static force from 8 tons to maximum 15 tons, dynamic load from 5 tons to maximum 10 tons.
2. Open loose-leaf articular structures form of high strength tensile pattern steel plate, connect by a diameter of 25-30mm (1 "-1.2") of high-strength galvanized steel. Open loose-leaf articular than the traditional welded joints, increase welded area up to 300%, the force area increased by 2.5 times, pull the loose-leaf small pull increase up to 4 times' load bearing capacity; and easier maintenance.
3. Open base，easy to clean-up and easy maintenance the pit.
4. Power unit，form by the integrated style hydraulic system and hydraulic pump station. Power unit was installed in the unloading platform's base, the installation location above the pit bit-plane, away from the garbage and debris.
5. Power configuration We can offer two power configurations for customers to choose: 380V/50Hz/0.75Kw and 220V/50Hz/1.1Kw; equipped with built-in anti-overloading motor.
6. Integrated hydraulic system, master cylinder inner diameter of 63mm (2-1/2 "), auxiliary cylinder inner diameter of 50mm (2"). Applies to 40 ℃ (100 ℉) ambient temperature. Single-tube connection extended completely sealed hydraulic system and hydraulic pump station using life, reduced maintenance costs.
7. Control panel, one-touch button switch, easy to operate. The equipment park is equipped the storage interlock device, and further enhance security.
8. The independent supporting leg structure, patented design 28 tons (60,600 lbs.) Supporting leg structure, in the unloading process, when the truck suddenly left the platform unloading area, the supporting legs can keep the goods and the forklifts in the level, minimize accidents happen, ensure the safety of the operator.
9. Anti-pinch design, both sides of the anti-pinch guard in the unloading platform discharge guard, along the border with yellow / black stripes warning bar, even when large table is rising highest, the side plate can ensure the side area full closure, which can effectively avoid the risk of crushing the toes, adequately protect people, forklift, goods.
10. Assembly maintenance supporting rod, unloading platform with assembly maintenance supporting rod, when the equipment is repairing or clean the bit, support the unloading platform. in order to protect the operator who under the platform.
11. Floating adjusted when loose-leaf small slab ride the truck's tail, can be vertical deflection, adjust the range of 100mm (4 ") or less.
12. Bumper rubber， in the front of the unloading platform there equipped with two heavy-duty rubber bumper, model B300-250F, 250mm x 300mm (10 "x 12"). |
